u
ERROR [202, 204] : CONNECTION 连接
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
此错误消息会在Activesync没有正确连接到设备时显示,请在运行RUU前确定已经正确连接好.
u
ERROR [206] : MEMORY ALLOCATION 内存分配
u
ERROR [280] : UPDATE ERROR 更新失败
When you see any of these error messages, close other running programs on the computer and run RUU again.
当看见此错误时,关闭所有程序后重新运行RUU
u
ERROR [208] : FILE OPEN 文件打开
u
ERROR [210] : FILE READ 读取文件
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
此错误表明RUU升级包没有包含某重要的文件,请获取完整的RUU升级包
u
ERROR [212] : FILE CREATE 建立文件
u
ERROR [214] : FILE WRITE 写入文件
u
ERROR [222, 224] : DEVICE NOT RESPONDING 设备没有响应
These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.
此错误在远程访问控制失败时显示,检查ActiveSync连接后重新运行RUU程序
u
ERROR [220] : MAIN BATTERY POWER 主电池太低
This error message will appear when the device’s battery power is not sufficient.
Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
此错误显示表明设备电池不满,尽管RUU会指导你连接上AC电源适配器,你仍需要确定你设备的电池有足够的电量来完成Radio的升级(因为使用AC电源升级Radio的时候,AC电源不会对设备的电池进行充电)
u
ERROR [238] : FILE READ 文件读取
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
此错误因为某些不能确定的原因, 设备的ROM镜像是损坏的,请下载整个RUU程序再试
u
ERROR [240] : FILE OPEN 文件打开
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
当此错误显示时,请检查下载的ROM镜像是否放在了RUU目录中,如果是,则发生未知错误,请下载RUU重新试一遍
u
ERROR [242] : INVALID LANGUAGE 错误的语言
u
ERROR [244] : INVALID MODEL ID 错误的模块号
u
ERROR [294] : INVALID VENDER ID 检查CID错误
u
ERROR [296] :
UPGRADE ONLY 仅仅能升级(不能降级)
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
这些错误发生则表明使用了错误的RUU程序,RUU程序会检测Model ID,Language ID是否与你设备兼容.请确认你使用了合适的RUU程序来进行更新
u
ERROR [246] : DEVICE NOT RESPONDING 设备没有响应
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
此信息表明RUU不能开始更新进程.请联系你的服务商( 晕,有这么严重吗)
u
ERROR [248~260] : UPDATE ERROR 更新错误
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
错误发生表明有一个"打开端口错误"在更新ROM之前发生.解决:软启动设备后运行RUU.如果仍旧发生,请重新启动计算机.
u
ERROR [262] : UPDATE ERROR 更新错误
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
与上面那个差不多了,这里说软启动设备后重新运行RUU程序,更新进程会继续.
注明:此种状态下,Wince已经被损坏,否则会进入升级模式.
u
ERROR [264, 274] : CONNECTION 连接
u
ERROR [302~318] : UPDATE ERROR 更新错误
u
ERROR [320~328] : INVALID COMMAND 错误的命令
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
此种错误较少发生,如果发生了,则无法解决恢复,把设备送回服务中心吧.(晕,还好没有遇到过)
u
ERROR [300] :
INVALID UPDATE TOOL 错误的更新工具
This error message will appear when you use the incorrect RUU version to upgrade.
此错误表明RUU版本不对
u
ERROR [330] : ROM IMAGE ERROR ROM镜像错误
This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.
使用了错误的RUU程序,并且ROM大小超过了设备Flash ROM的大小
转自yifaa
这个东东其实还是蛮有用的。失败时可以排查一下。
