开启辅助访问 切换到宽版

QQ登录

只需一步,快速开始

扫一扫,访问微社区

注册帐号 找回密码

MAXPDA

    查看: 7467|回复: 13

    Blackberry Device Error Codes(硬件错误代码查询)

    [复制链接]
    发表于 2006-11-29 09:35 | 显示全部楼层 |阅读模式
    Blackberry Device Error Codes(硬件错误代码查询)
    当你WIPE(擦除)机器时出现Device Error 时是有个代码的!可以相对的对应以下的处理办法。
    (原文是原英文的!本想翻译好了在贴出来,但是英文还算可以的人也是可以先将就将就,有时间在增加翻译好的内容把……)


    300-303 Bad load
    Run Application Loader to reload the operating system and applications onto the handheld.

    395 Unclassified error code
    You receive the following error message on the handheld:
    Device Error 395

    Cause

    Device Error 395 is an unclassified error code. This error can be caused by a third party application installed on the handheld.

    Resolution 1

    Perform a hard reset on the handheld: Shut down, remove the battery wait a few second... replace battery then see when happens when it starts.

    Resolution 2

    Erase and reload the data on the handheld.
    1、In BlackBerry Desktop Manager, use the Backup and Restore tool to create a backup file of the data on your handheld. For instructions, see “Back up handheld information” in the Desktop Manager Online Help.Warning: The following steps will erase the data on the handheld.
    2、In BlackBerry Desktop Manager, double-click the Application Loader icon.
    3、Click Next. The Handheld Application Selection window appears.
    4、Verify that the correct applications are selected, then click Next.
    5、Click Advanced.
    6、Select the option for Erase all application data and Erase all currently installed applications, then click Next.
    7、Click Finish. The data on the handheld is erased, while the operating system and applications are reloaded onto the handheld.
    8、Use the Backup and Restore tool to restore to the handheld the data saved in the backup file. For instructions, see “Restore handheld information” in the Desktop Manager Online Help.

    400-564 Page faults
    Run Application Loader to reload the operating system and applications onto the handheld.

    310-314 Hardware failure
    Perform a hard reset on the handheld: Shut down, remove the battery wait a few second... replace battery then see when happens when it starts.
    OR
    Run Application Loader to reload the operating system and applications onto the handheld.
    Note: If these tasks do not resolve the error, contact your service provider.

    320-325 AMX failure
    Run Application Loader to reload the operating system and applications onto the handheld.

    330-339 Application tasks failure
    Run Application Loader to reload the operating system and applications onto the handheld.

    340-343 Memory failure
    You receive one the following error messages on your handheld:
    Device Error 340
    Device Error 341
    Device Error 342
    Device Error 343


    Cause

    Memory failure.

    Resolution

    Reduce the number of calendar appointments synchronized to your handheld.
    1、In BlackBerry? Desktop Manager, double-click the Intellisync icon.
    Click Configure PIM. The Handheld Configuration window appears.
    2、In the Handheld Applications list, select Calendar.
    3、Click Configure > Advanced Settings. The Advanced Settings for Calendar window appears.
    4、In the Date Range tab, perform one of the following tasks to reduce the number of calendar appointments synchronized to your handheld:
    If you click the Transfer only Future items option, only future calendar appointments will be synchronzied to your handheld.
    If you click the Transfer items within a range of Days option and enter date range in the fields provided, only the calendar appointments that scheduled within the date range will be synchronized to your handheld.
    5、Click OK to save your changes and close the window.
    7、In the Handheld Configuration window, ensure that the check box beside the Calendar application is selected, then click OK.
    8、In the Intellisync window, ensure that the Synchronize PIM check box is selected, then click Synchronize Now. The number of calendar entries on your handheld is reduced.
    If you still receive the error

    Run Application Loader to reload the operating system and applications onto your handheld.

    350-359 Software application failure
    You receive one of the following error messages on your handheld:
    Device Error 350
    Device Error 352
    Device Error 353
    Device Error 354
    Device Error 355
    Device Error 356
    Device Error 357
    Device Error 358
    Device Error 359


    Cause

    Software application failure.

    Resolution

    Perform a hard reset on the handheld.
    OR
    Run Application Loader to reload the operating system and applications onto your handheld. In the Application Loader Wizard window, do not select any third party applications. In the Advanced options, select the Erase all currently installed applications check box

    360-363 Flash memory failure
    Run Application Loader to reload the operating system and applications onto the handheld.

    365-368 This one is often followed by "OHHH @&#%!!"
    Contact your service provider.

    410 Radio failure
    Run Application Loader to reload the operating system and applications onto the handheld.
    Note: If this task does not resolve the error, contact your service provider.

    507 No applications on handheld
    You receive one of the following errors on your BlackBerry device while using Application Loader to install device software:


    Device Error 505
    Device Error 507


    Both errors indicate that no applications are loaded on the BlackBerry device.

    Cause 1

    During the Application Loader process, the existing applications on the BlackBerry device were erased, but Application Loader failed to load the new applications.

    Resolution

    Complete the following steps:
    1、Verify that device software is installed on your computer.
    2、If your BlackBerry device is connected to a laptop in a docking station, disconnect the laptop from the docking station and connect the device directly to the laptop.
    3、If a third-party program (e.g. virus scanner) is using the same COM port as BlackBerry Desktop Manager, close the third-party application to free the COM port.
    4、If you are using a USB adapter to connect your BlackBerry device to a serial port on your computer, temporarily connect your device to a computer with a USB port.
    5、In Desktop Manager, double-click Application Loader.
    6、Use Application Loader to install the device software.
    Cause 2

    You erased all the data and applications on your BlackBerry device by typing an incorrect password ten times in Application Loader.

    Resolution

    Complete the following steps:
    1、In Desktop Manager, double-click Application Loader.
    2、Use Application Loader to install the device software.

    [ 本帖最后由 jeffrey 于 2006-11-29 09:39 编辑 ]

    本帖子中包含更多资源

    您需要 登录 才可以下载或查看,没有帐号?注册帐号

    x

    评分

    参与人数 1评分 +7 收起 理由
    wangchengzhi + 7 辛苦了

    查看全部评分

    发表于 2006-11-29 10:39 | 显示全部楼层
    谢谢啦
    发表于 2007-2-1 21:13 | 显示全部楼层
    好东西!
    发表于 2007-2-1 22:41 | 显示全部楼层
    如果软件错误代码也有就好了.
    发表于 2007-2-10 16:42 | 显示全部楼层
    啥时翻译成中文就好了!俺看不懂鹰文
     楼主| 发表于 2007-4-20 17:41 | 显示全部楼层
    在次浮出
    发表于 2007-4-20 18:13 | 显示全部楼层
    发表于 2007-4-20 19:06 | 显示全部楼层
    好东西
    发表于 2007-4-20 19:43 | 显示全部楼层
    :victory:
    发表于 2007-4-27 12:55 | 显示全部楼层
    error 537 是啥意思啊??
    *滑动验证:
    您需要登录后才可以回帖 登录 | 注册帐号

    本版积分规则

    QQ|关于我们|联系我们|广告服务|小黑屋|Archiver|Sitemap|手机版|MAXPDA ( ICP13038095-1 )

    GMT+8, 2019-8-25 06:34

    快速回复 返回顶部 返回列表